Description

Feature: Fast&Accurate Reading, Large Backlight Display, Premium ABS Material Shell, Safe Stainless Steel Probe, HOLD Function, ℃/℉ Switch Product Parameters: Measurement Range:-58°F to 572°F (-50°C to 300°C) Measurement Accuracy: ±0.1°C(±0.1°F) Battery: AAA Battery * 1 Probe Diameter: 3.5mm Temperature Function: A.In normal mode, the LCD normally displays the current ambient temperature. B.Automatically detect the current ambient temperature and update the data three times per second. C.Temperature measurement range: -50°C to 300°C, temperature minimum display: 0.1°C When the temperature is lower than -50°, LCD displays LL.L, when the temperature is higher than 300°C, LCD displays HH.H Button Function: “✲” Press to enter the temperature setting mode.Hold for 2s to lock the current temperature. “▲” Press to increase the value by one, Hold to increase quickly in setting mode. “▼” Press to decrease the value by one, Hold to decrease quickly in setting mode. “℉/℃”Press to turn on/off the machine, Hold to switch the temp unit. “”Press to turn backlight on or off, automatic off with no operation after 10s. Temperature Alarm Function A.In normal mode, press the✲key to enter the temperature alarm setting mode, the LCD has"SET TEMP" character display, the temperature is flashing, press the ▲ or ▼ key to adjust the temperature value. Press ✲ again to confirm the temperature value and return to normal mode. Default setting temperature: 100°C Alarm temperature setting range: -50°C to 300°C(-58°F to 572°F) B.In setting mode, press▲ or ▼ key for adjustment, Hold ▲ or ▼ key for adjust quickly. C.In setting mode, 1 minute of no operation will automatically exit setting mode and save the current value and return to normal mode. D.When setting alarm temperature, increase or decrease by 1°C or 1°F. E.When the measured temperature exceeds the set temperature, it will alarm and remind immediately and the LED light flashes, when the measured temperature keeps exceeding the set temperature, the LED light flashes for maximum 30s and then stops, when the measured temperature does not exceed the set temperature, the LED light stops flashing. Installation: Install the battery, LCD display for 2s while the backlight turn up for 2s to enter the normal mode，start measuring the temperature of the current environment. LCD has "CURRENT" (current temperature) character display. 【8 Inch Long Probe With Pot Clip】The deep fry thermometer features an 8 inch super-long probe. The pot clip can fixes the thermometer on the pot, freeing your hands while protecting you from the heat 【90-Degree Rotatable Backlit Display】The candy thermometer's display can be rotated 90 degrees to allow you to read the temperature measurement from the correct angle 【Fast And Accurate Response】Meat thermometer responds quickly within 4-6 seconds with an accuracy of ±0.1°F /0.1℃. Wide temperature range from -58°F to 572°F(-50°C to 300°C) 【Hold Temp Function, ℃/℉ Conversion】 The hold function can lock the measurement results for later viewing and recording. The ℃/℉ conversion function can switch between Celsius and Fahrenheit 【Temperature Alarm Function 】You can easily preset the warning temperature. When the measured temperature exceeds the set temperature, it will alarm and remind immediately and the LED light flashes for 30s, So you don't have to worry about missing the optimal temperature. Product Package: 1 x Candy Thermometer, 1 x Pot Clip, 1 x Probe Protective Sleeve, 1 x Instruction Manual, Product requires 1 x AAA Battery (not included)